VMIVME-2128燃機卡件,GE電氣VMIVME-2128
控制器已通過以下國際公認標準認證，符合多項國際公認標準
認證機構，這些認證使Tricon在世界各地的安全關鍵應用中獲得了使用資格。各部門的測試報告
可根據要求提供認證機構。
TüV萊茵-TüV已證明Tricon v9和v10控制器VMIVME-2128標準
如下所列，因此有資格在以下應用程序和司法管轄區中使用。
?緊急安全停機或其他需要SIL 1-3認證的關鍵控制應用，符合
IEC 61508 9（僅限Tricon v9.6或更高版本）
?緊急安全關閉或其他關鍵控制應用程序需要AK 1-AK6認證，符合VMIVME-2128燃機卡件
DIN V 19250和DIN V VDE 0801（僅限Tricon v9.x）
?需要根據EN 54要求進行認證的火災和氣體探測應用
?火災和氣體探測應用需要根據NFPA 72的要求進行認證（僅限Tricon v9.6或更高版本）
?燃燒器管理應用需要根據DIN VDE 0116的要求進行認證
?燃燒器管理應用需要根據NFPA 8501或NFPA 8502的要求進行認證（僅限Tricon v9.6或更高版本）
?歐盟或其他司法管轄區內要求符合EMC指令89/336/EEC和低壓的所有應用
第72/23/EEC號設備指令
?歐盟或其他司法管轄區內的所有應用程序都需要符合ATEX指令第94/9/EC號，適用于2區IIB組
危險場所
?半導體制造設施中的環境、健康和安全應用符合SEMI S2的要求
對于危險位置應用，請參閱Tricon規劃和安裝指南，以獲取特定應用的安裝說明
International Approvals
The Tricon controller has been certified as complying with multiple internationally recognized standards by the following internationally recognized
certification agencies, these certifications have qualified the Tricon for use around the world in safety critical applications. Test reports from the various
certification agencies are available upon request.
TüV Rheinland — TüV has certified that the Tricon v9 and v10 controllers are in full compliance with the internationally recognized standards
listed below, and thus are qualified for use in the following applications and jurisdictions.
? Emergency safety shut-down or other critical control applications requiring SIL 1-3 certification per the functional safety requirements of
IEC 61508 9 (only Tricon v9.6 or later)
? Emergency safety shut-down or other critical control applications requiring AK 1-AK6 certification per the functional safety requirements of
DIN V 19250 and DIN V VDE 0801 (only Tricon v9.x)
? Fire and gas detection applications requiring certification per the requirements of EN 54
? Fire and gas detection applications requiring certification per the requirements of NFPA 72 (only Tricon v9.6 or later)
? Burner management applications requiring certification per the requirements of DIN VDE 0116
? Burner management applications requiring certification per the requirements of NFPA 8501 or NFPA 8502 (only Tricon v9.6 or later)
? All applications in the European Union or other jurisdictions requiring compliance with the EMC Directive No. 89/336/EEC and Low Voltage
Equipment Directive No. 72/23/EEC
? All applications in the European Union or other jurisdictions requiring compliance with the ATEX Directive No. 94/9/EC for Zone 2, Group IIB
hazardous locations
? Environmental, health, and safety applications in semiconductor manufacturing facilities per the requirements of SEMI S2
For hazardous location applications, see the Tricon Planning and Installation Guide for application-specific installation instructions
