產品內容介紹
12P1732X042模擬量輸入模塊
最小命令延遲
0至65535毫秒
此參數指定初始發布之間等待的毫秒數命令。
此參數可用于將發送到服務器的所有命令延遲到避免在網絡(luò )上“泛濫”命令。此參數不影響命令，因為它們將在識別到故障時發出。響應超時0至65535毫秒
此參數指定如果沒有從尋址服務器收到響應，客戶端在重新發送命令之前等待的時間（毫秒）。
價值使用取決于使用的通信網絡(luò )類型和預期響應網絡(luò )上最慢設備的時間。
SIE客戶端x命令配置的SIE Client x Commands部分設置了Siemens Industrial以太網客戶端命令列表。
此命令列表輪詢西門子工業以太網連接到西門子工業以太網客戶端端口的服務器設備。
模塊支持多種命令。這使得模塊可以與各種各樣的接口西門子工業以太網協議設備。
每個命令所用的功能代碼都是西門子規定的工業以太網協議。每個命令列表記錄都具有相同的格式。
第一個記錄的一部分包含與MVI56E-SIE通信相關的信息模塊，第二部分包含與西門子接口所需的信息工業以太網服務器設備。
命令列表概述為了將模塊與西門子工業以太網服務器設備連接必須構造命令列表。
列表中的命令指定服務器設備被尋址，要執行的功能（讀或寫），設備中的數據區接口，以及與設備關聯的內部數據庫中的寄存器
數據客戶機命令列表最多支持16個命令。
命令列表從上到下進行處理（命令#1）。
輪詢間隔參數與每個命令關聯，以指定以十分之一為單位的最小延遲時間命令發出之間的秒數。
如果用戶為指定值10參數，則命令的執行頻率不會(huì )超過每1秒一次。
模塊支持的命令
列表中每個命令的格式取決于西門子工業以太網正在執行的功能代碼。
下表列出了模塊支持的功能。
函數的類型這也將取決于服務器設備及其支持的內容。
以下是使用支持的S7-200、S7-300和S7-1200功能的示例MVI56E-SIE模塊。每個命令列表記錄具有相同的常規格式。
記錄的第一部分包含與通信模塊相關的信息，以及第二部分包含與西門子工業以太網服務器接口所需的信息裝置命令輸入格式下表顯示了每個支持的命令。
Minimum Command Delay
0 to 65535 milliseconds This parameter specifies the number of milliseconds to wait between the initial issuances of a command. This parameter can be used to delay all commands sent to servers to avoid "flooding" commands on the network. This parameter does not affect retries of a command as they will be issued when failure is recognized. Response Timeout 0 to 65535 milliseconds This parameter specifies the time in milliseconds that a Client will wait before retransmitting a command if no response is received from the addressed server. The value to use depends on the type of communication network used, and the expected response time of the slowest device on the network.
Each command list record has the same general format. The first part of the record contains the information relating to the communication module, and the second part contains information required to interface to the Siemens Industrial Ethernet server device. Command Entry Formats The following table shows the structure of the configuration data necessary for each of the supported commands.
SIE Client x Commands
The SIE Client x Commands section of the configuration sets the Siemens Industrial Ethernet Client command list. This command list polls Siemens Industrial Ethernet server devices attached to the Siemens Industrial Ethernet Client port. The module supports numerous commands. This permits the module to interface with a wide variety of Siemens Industrial Ethernet protocol devices. The function codes used for each command are those specified in the Siemens Industrial Ethernet protocol. Each command list record has the same format. The first part of the record contains the information relating to the MVI56E-SIE communication module, and the second part contains information required to interface to the Siemens Industrial Ethernet server device. Command List Overview In order to interface the module with Siemens Industrial Ethernet server devices, a command list must be constructed. The commands in the list specify the server device to be addressed, the function to be performed (read or write), the data area in the device to interface with, and the registers in the internal database to be associated with the device data. The Client command list supports up to 16 commands. The command list is processed from top (command #1) to bottom. A poll interval parameter is associated with each command to specify a minimum delay time in tenths of a second between the issuances of a command. If the user specifies a value of 10 for the parameter, the command will be executed no more frequently than every 1 second. Commands Supported by the Module The format of each command in the list depends on the Siemens Industrial Ethernet Function Code being executed. The following table lists the functions supported by the module. The type of functions that will be supported will also depend on the server device and what it can support. Below are examples of S7-200, S7-300 and S7-1200 functions that are supported using MVI56E-SIE module.
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃氣發電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
