EMERSON KJ3102X1-BA1 DCS卡件
必須在BIOS中啟用“傳統USB支持”，以允許USB鍵盤/鼠標作為PS/2設備運行。必須在安裝之前和Windows NTW 4.0運行期間啟用此設置。有關更改BIOS設置的指南，請參閱第87頁的“BIOS設置”。BIOS設置要啟用/禁用傳統USB支持和/或為USB控制器分配中斷，請執行以下概述的相應操作：1。CPU通電或復位后，立即按F2鍵進入“PhoenixBIOS設置實用程序”。2.使用箭頭鍵選擇“高級”菜單。3.使用箭頭鍵，選擇“已安裝O/S”設置。按數字鍵盤上的+或–，在“其他”、“Win95”和“Win98/Win2000”之間切換設置。4.使用箭頭鍵，選擇“將中斷分配給USB”設置。按數字鍵盤上的+或–在“啟用”和“禁用”之間切換設置。使用箭頭鍵選擇“傳統USB支持”設置。按數字鍵盤上的+或–，在“啟用”和“禁用”之間切換設置。6.按F10，然后按ENTER保存設置并退出BIOS。注：有關正確設置，請參見第86頁的“在Microsoft Windows操作系統中使用USB鍵盤/鼠標”。
Legacy USB Support’ must be enabled in the BIOS to allow a USB keyboard/mouse
to operate as a PS/2 device. This setting must be enabled prior to the installation and
during the operation of Windows NTW 4.0. See “BIOS Setup” on page 87 for
guidelines on changing BIOS settings.BIOS Setup
To enable/disable Legacy USB Support and/or assign a interrupt to the USB
controllers, perform the appropriate actions as outlined below:
1. Immediately after the CPU has been powered on or reset, press F2 to enter the
‘PhoenixBIOS Setup Utility’.
2. Using the arrow keys, select the ‘Advanced’ menu.
3. Using the arrow keys, select the ‘Installed O/S’ setting. Press + or – on the
number keypad to toggle the setting between ‘Other’, ‘Win95’ and
‘Win98/Win2000’.
4. Using the arrow keys, select the ‘Assign Interrupt to USB’ setting. Press + or – on
the number keypad to toggle the setting between ‘Enabled’ and ‘Disabled’.Using the arrow keys, select the ‘Legacy USB Support’ setting. Press + or – on the
number keypad to toggle the setting between ‘Enabled’ and ‘Disabled’.
6. Press F10, then ENTER to save settings and exit the BIOS.
NOTE: See “Using USB Keyboard/Mouse with Microsoft Windows Operating
Systems” on page 86 for proper settings.
