SCHNEIDER TSXCUSBMBP適配器
在內容框架中，您將獲得以下信息：?主機–所選主機為主動（主）或被動（備份或未配置）；與冗余主機的通信正?；蚴艿礁蓴_。–PROFIBUS線路A和B的狀態–PROFIBUS主設備的狀態。它可以處于停止、清除或操作模式。?從屬設備–DataExchange中所有從屬設備的列表。–具有診斷數據的所有從屬設備的列表。–CI854/CI854A上配置的所有從設備列表。主設置使用此功能查看CI854/CIL854A PROFIBUS主設備中當前加載的設置。在內容框中，您將獲得以下信息：要獲取當前看門狗時間，請選擇SlaveConfig。從屬診斷使用此功能查看從屬單元中當前存在的診斷。在輸入對話框中，輸入要讀取診斷數據的從屬設備的節點地址。在內容框中，您將獲得以下信息：如果設置了Ext_Diag_Overflow（激活時顯示在工作站狀態中），則從單元當前具有的診斷信息比通過PROFIBUS診斷所指示的更多。在這種情況下，活動診斷字節數超過了從設備的GSD文件中定義的Max_Diag_Data_Len。
In the content frame you will get information about:
? Master
– Selected master is active (primary) or passive (backup or not configured);
the communication to the redundant master is ok or disturbed.
– Status of PROFIBUS Line A and B.
– Status of PROFIBUS master. It can be in Stop, Clear or Operate mode.
? Slaves
– List of all slaves that are in DataExchange.
– List of all slaves that have diagnostic data.
– List of all slaves that are configured on CI854/CI854A.MasterSettings
Use this function to see which settings are currently loaded in the CI854/CI854A
PROFIBUS master unit. In the content frame you will get the following
information:To get the current watchdog time please select SlaveConfig.
SlaveDiagnosis
Use this function to see which diagnostics are currently present in the slave unit. In
the input dialog enter the node address for the slave device you would like to read
the diagnostic data for. In the content frame you will get the following information:If Ext_Diag_Overflow is set (shown in the stations state when active) then the slave
unit has currently more diagnostics than it can indicate via the PROFIBUS
diagnosis. In this case the number of active diagnosis bytes exceeds
Max_Diag_Data_Len that is defined in the GSD file of the slave.
