WOODWARD 5466-315數字量輸入卡件
1.產 品 介 紹
品牌：WOODWARD
型號說明：WOODWARD 5466-315數字量輸入卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
WOODWARD 5466-315保護接地（PE）始終在連接至115/230 V交流電源的設備上安裝保護接地連接。出于電氣安全的原因，所有導電部件（如DIN導軌或導軌固定的導電部件）都需要連接到PE。需要這種PE連接的安全原因是，例如，機柜內布線僅提供基本絕緣，或意外接觸/連接（如松脫電線）導電金屬部件的危險電壓。該連接應滿足IEC61131-2中PE連接的要求，即：靜態電流為30 A的導體，WOODWARD 5466-315測量的壓降對應于<0.1歐姆。ABB強烈建議，如果是銅導線，設備PE導線的橫截面應為35 mm2（2 AWG）。熔斷外部電源電纜標準AC 800M控制器配置的外部電源的推薦熔斷器額定值，安裝在地板或壁裝柜內，WOODWARD 5466-315
Protective Earth (PE) Always install a protective earth connection on equipment connected to a 115/230 V AC supply. For electrical safety reasons all conductive parts, such as the DIN-rail or the conductive parts to which the rail is fastened, are required to be connected to PE. The safety aspect that requires such a PE-connection is due to e.g. in-cabinet wiring providing basic insulation only or accidental touch/connection (e.g. loose wires) of hazardous voltages to conductive metal parts. The connection shall fulfill the requirements in IEC61131-2 for PE connections, that is: A conductor which, having a static current of 30 A flowing through, measures a voltage drop which corresponds to <0.1 ohm. ABB strongly recommends that the equipment PE-conductor should be of 35 mm2 (2 AWG) cross section if copper lead.Fusing the External Mains Supply Cable The recommended fuse rating for the external mains supply of a standard AC 800M Controller configuration, housed within a floor or wall-mounted cabinet,WOODWARD 5466-315
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.fs-it.com.cn
