NI PXI-8331接口卡
1.產 品 介 紹
品牌：NI
型號說明：NI PXI-8331接口卡
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
安裝PROFINET IO接口CI871 CI871單元由處理器單元通過CEX總線供電，不需要額外的外部電源。安裝CI871:1。將CI871裝置安裝在DIN導軌上。2.將100 Mbps以太網電纜連接到基板上的CH1連接器。3.將以太網電纜的另一端連接到PROFINET IO網絡(luò )。安裝MOD5接口NI PXI-8331單元由處理器單元通過CEX總線供電，不需要任何額外的外部電源。安裝CI872:1。將裝置安裝到DIN導軌上。2.將光纖電纜連接到NI PXI-8331上的CH1、CH2和CH3連接器。將保護插頭安裝在未使用的端口上。3.將光纖電纜的另一端連接到MOD5控制器。光纖規格以下數據適用于A(yíng)C 800M控制器和MOD5控制器之間的光纖連接：?波長：820 nm。?光纖尺寸：62.5/125 m多模玻璃光纖。?連接器類型：ST.?最大標稱光纖阻尼，包括連接器：11 dB。NI PXI-8331
Installing the PROFINET IO InterfaceNI PXI-8331 unit is powered from the processor unit through the CEX-Bus, which requires no additional external power source. To installNI PXI-8331: 1. Mount the CI871 unit on the DIN-rail. 2. Connect the 100 Mbps Ethernet cable to the CH1 connector on the baseplate. 3. Connect the other end of the Ethernet cable to the PROFINET IO network. Installing the MOD5 Interface CI872 The CI872 unit is powered from the processor unit through the CEX-bus, and does not require any additional external power source. To install NI PXI-8331: 1. Mount the unit onto the DIN-rail. 2. Connect the fiber optic cables to the CH1, CH2, and CH3 connectors on the CI872. Leave the protective plugs mounted on unused ports. 3. Connect the other end of the fiber optic cable to a MOD5 controller. Fiber Optics Specifications The following data applies for the fiber optics connections between the AC 800M controller and MOD5 controllers: ? Wavelength: 820 nm. ? Fiber size: 62.5/125 m multimode glass fiber. ? Connector type: ST. ? Max nominal fiber damping including connectors: 11 dB.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.fs-it.com.cn
