ABB SB522K01 3BSE016019R1電池單元

1.產    品     資    料    介    紹：

中文資料：

ABB SB522K01 3BSE016019R1內存保護開關啟用或禁用與運行/停止開關相關的內存保護功能。選項：已啟用：內存保護已啟用，可防止寫入程序內存和配置以及強制或覆蓋離散數據。ABB SB522K01 3BSE016019R1已禁用：內存保護已禁用。默認設置：禁用。

ABB SB522K01 3BSE016019R1加電模式選擇加電后立即生效的CPU模式。選擇：最后、停止、運行。默認值：Last（上次斷電時的模式）。注意：如果ABB SB522K01 3BSE016019R1電池或能量包丟失或出現故障，并且邏輯/配置加電源設置為始終RAM，則無論加電模式參數設置如何，CPU都會(huì )在STOP模式下加電。

ABB SB522K01 3BSE016019R1地址空間映射類型指定用于Modbus TCP/IP客戶端和PACSystems控制器之間數據傳輸的內存映射類型。選項：禁用：禁用設置用于包含不支持Modbus TCP的以太網固件的系統。ABB SB522K01 3BSE016019R1

英文資料：

ABB SB522K01 3BSE016019R1 Memory Protection Switch Enables or disables the Memory Protect feature associated with the RUN/STOP Switch. Choices: Enabled: Memory Protect is enabled, which prevents writing to program memory and configuration and forcing or overriding discrete data. Disabled: Memory Protect is disabled. Default: Disabled.ABB SB522K01 3BSE016019R1

ABB SB522K01 3BSE016019R1 Power-up Mode Selects the CPU mode to be in effect immediately after power-up. Choices: Last, Stop, Run. Default: Last (the mode it was in when it last powered down). Note: If the battery or Energy Pack is missing or has failed and if Logic/ Configuration Power-up Source is set to Always RAM, the CPU powers up in STOP Mode regardless of the setting of the Power-up Mode parameter.ABB SB522K01 3BSE016019R1

ABB SB522K01 3BSE016019R1 Address Space Mapping Type Specifies the type of memory mapping to be used for data transfer between Modbus TCP/IP clients and the PACSystems controller. Choices: Disabled: The Disabled setting is intended for use in systems containing Ethernet firmware that does not support Modbus TCP.

2.產      品      展      示      

3.主      營      品      牌      

本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.fs-it.com.cn